![background image](http://html.mh-extra.com/html/bmpro/033362/033362_owners-manual_2779806008.webp)
8
MOUNTING
It is essential the SwayControl is mounted in the correct orientation.
Figure 1:
The
SwayControl
label with guidance on orientation and mounting.
Ensure that the SwayControl is mounted in the correct up direction.
The centre of the SwayControl (marked by the orange dot on the SwayControl
label) must be positioned over the centre line of the caravan/trailer.
The bottom edge of the SwayControl (as indicated by the orange line on the
bottom of the SwayControl label) must be mounted parallel to the trailer beam
axle.
Mount the SwayControl to the caravan/trailer using the mounting flanges
located on the sides of the unit. Use four #10 self-tapping screws (not supplied)
with starlock washers to mount the SwayControl.
It is recommended that starlock washers are used and that mounting screws
are securely tightened to hold the SwayControl firmly in position and to avoid
becoming loose from vibration.
WARNING
DO NOT drill holes in the SwayControl for any reason. Drilling holes or puncturing the
unit will void your warranty.
Содержание 033362
Страница 1: ...TEAMBMPRO COM OWNER S MANUAL SwayControl ...
Страница 2: ......
Страница 5: ......
Страница 10: ...10 WIRING DIAGRAM ...