background image

 

 USB-AD16f 

Data acquisition system (USB) 

 

 

Functional diagram 

Measurement & Control. 
Extremely powerful. 

Precisely record and output signals with the  
USB-AD16f: The high-performance USB data 
acquisition system accomodated in a stable 
aluminum housing impresses by high technical 
standard and excellent price-performance ratio. It 
is especially suitable for dynamic applications. 

Clearly safe. 

Due to the galvanic isolation of the analog 
channels the DAQ system and the PC are 
perfectly protected. 

16 analog inputs. 250kHz 
16 bit. 

±

10V, 

±

5V, 

±

2V, 

±

1V. 

16 analog inputs can be sampled with 16 bit 
resolution and 250kHz total sampling rate so that 
even slightest peaks of high-frequent signals do 
not remain undetected. The measuring range is 
selected via software for each channel separately. 

2 analog outputs. 16 bit. 

±

10V. 

The two 10V outputs can be used for analog 
controls with 16 bit accuracy. 

4 digital inputs/outputs each. 
1 counter. 

Digital states are recorded or set at four digital in-
puts and outputs each. Digital inputs are sampled 
time-synchronously with the analog inputs. The 
additional counter input is galvanically isolated. 

Plug & Play. 

The connection to the PC is realized via USB. 
The USB-AD16f provides all typical USB 
features (e.g. Plug&Play, Hot-Plug). Up to 127 
devices can be connected and installed during 
operation. 

Powered by USB.  

The device is supplied with power via the USB 
interface. This reduces cabling efforts to a 
minimum and makes mobile measurements a lot 
easier.  

Open for everyone. 

Widely supported: The data acquisition system 
can be used under Windows

®

 7/XP as well as 

under MAC OS X, Free BSD and Linux. The 
complete software for installation and program-
ming of the USB-AD16f is included for free. 
 

  

  

 

NextView

®

4. Try for free. 

The DAQ system is supported by NextView

®

 4, 

the software for data acquisition and analysis. A 
fully functional 30-day trial is included with 
delivery to directly test the functionality of the 
USB-AD16f. 

Содержание USB-AD16f









Отзывы: