USB-AD14f
Data Acquisition System (USB)
Functional diagram
Measurement & Control.
Super-Low Priced.
Record and output signals with the USB-AD14f.
The USB data acquisition system accomodated in
a stable aluminum housing is ideal for medium-
class applications impressing by universal appli-
cability and an excellent price-performance-ratio.
16 Analog Inputs.
20kHz. 14 Bit.
10V.
Voltage signals in the
10V range are connected
at 16 analog inputs. Sampling is done with 14 bit
resolution and 20kHz total sampling rate.
1 Analog Output. 12 Bit.
5V.
The 5V output can be used for analog control
with 12 bit accuracy.
8 Digital IN. 8 Digital OUT.
1 Counter.
Digital states are recorded or set at eight digital
inputs and outputs each. Digital inputs are
sampled time-synchronously with the analog
inputs. The USB-AD14f features a 16-bit counter
for the acquisition of counting pulses.
Plug & Play.
The connection to the PC is realized via USB.
The USB-AD14f provides all typical USB
features (e.g. Plug&Play, Hot-Plug). Up to 127
devices can be connected and installed during
operation.
Powered by USB.
The device is supplied with power via the USB
interface. This reduces cabling efforts to a
minimum and makes mobile measurements a lot
easier.
Open for Everyone.
Widely supported: The data acquisition system
can be used under Windows
®
XP/7/8/10 as well
as under Mac OS X, Free BSD, and Linux. The
complete software for installation and program-
ming of the USB-AD14f is included for free.
NextView
®
4. Try for Free.
The DAQ system is supported by NextView
®
4,
the software for data acquisition and analysis. A
fully functional 30-day trial is included with
delivery to directly test the functionality of the
USB-AD14f.
Accessory.
Makes Everything so Easy.
Use the demo board ZU-DBD featuring various
operating controls and sensors to generate 16
analog signals and record them with the USB data
acquisition system.
