15
MAINTAINING
A. Maintaining water quality
1.
Clean the filter cartridge at least once after 72 to 120 hours of operation. Replace the filter
cartridge at least once a month depending on use.
2.
Change the water every few days, or use appropriate pool chemicals. Consult your local spa tub
or pool retailer for more information about chemical maintenance. Pay close attention to the
chemicals manufacturer’s instructions. The warranty does not cover spa damage resulting from
misuse of chemicals and mismanagement of spa water.
A. We recommend that you maintain the water PH at between 7.2 and 7.8, while total
alkalinity should be between 80 and 120 ppm and free chlorine between 3 to 5 ppm.
B. Purchase a test kit to test the water chemistry each time you use the spa tub, or at least
once a week. Low PH will damage the spa tub and pump. The warranty does not cover
damage resulting from any chemical imbalance.
C. Water sanitation is the responsibility of the spa tub owner and is achieved through the
regular addition of an approved sanitizer. The sanitizer will chemically control bacteria and
viruses which are present in the water or are introduced while the spa tub is used.
B. Cleaning the filter cartridge
1.
Unplug the spa tub from the socket.
2.
Unscrew the filter cartridge.
3.
Remove the filter cartridge cover.
4.
Rinse off the filter cartridge with a garden hose and reuse it. Replace the filter cartridge if it is
still soiled and discoloured after cleaning.
5.
Refit the filter cartridge cover and the filter cartridge.
Figur
e 7
Figur
e 9
Figur
e 8
Figur
e 10
EN
2021-10-12 OCG BluMill Spa Pool Santa Monica Manual V01.indd 15
2021-10-12 OCG BluMill Spa Pool Santa Monica Manual V01.indd 15
16-12-2021 09:56
16-12-2021 09:56
