Bluestone ICB-6629, Руководство пользователя, Страница: 12 / 14

23 22
ENGLISH ENGLISH
• Steel, enameled iron, stainless steel, flat-bottom pans/pots with bottom
diameter from 12cm to 26cm.
• So suggest to use the required pot, do not try to use other pot instead (especially
pressure sensors vessels).
• Weight requirements: the pot (including the food and water inside) is less
than 15kg.
• Pan/pot must be suitable for induction cooker.
• Pan/pot should be tried out if it’s bought by yourself to see if there are unusual
phenomena.
• Pan/pot bought by yourself should be flat and come with the cover with gas vent.
For safety, you must pour water full of pot and boil to reject impurities before first use.
APPLICABLE VESSEL
MATERIAL REQUIRED 1
PLEASE KINDLY ACCORDING TO THE BELOW REQUIREMENT
2
*Noted:
CLEANING AND MAINTENANCE
1. Remove the power plug prior to cleaning the unit. Do not clean it until the
cooking surface has completely cool down.
2. To clean the ceramic surface, control panel an the outer layer of the unit
* Use soft cloth to wipe away slight stain.
* Use a damp cloth with light detergent for grease, dirt or ink blot.
3. Dust will accumulate on the ventilation holes or on the fan’s blade after
multiple uses. Gently clean with a brush or cotton stick regularly.
4. Do not soak the unit under water or wash with other liquid.
5. To prolong the lifespan of the unit, make sure to firmly plug the unit into the
electrical outlet.
6. Do not power off the unit by pulling the power cord from the electrical outlet
as this will significantly reduce the lifetime of the unit. To turn off the unit,
press “MỞ/TẮT” first before plugging the cord out of the outlet.
7. The cooling fan will still function after powering off to continue releasing
excessive heat. To prolong the product’s lifespan, wait until the cooling fan
completely come into rest, then plug the unit out.
8. Make sure to disconnect the power cord and store away when finished using.
TROUBLE SHOOTING
Kindly refer to the below table to troubleshoot issues that may occur while
operating the unit. If malfunctions are found, please discontinue using the product
and seek for repair from your nearest warranty service center.
FAULT DISPLAY MALFUNCTION INSPECTION
No “beeping” sound is heard,
indicator lights and LED
display are not turned on.
Is the unit plugged in? Is
there power in the outlet? Is
the power cord damaged in
anyway?
E0
The unit suddenly stop
working, continuous
“beeping” sound is heard.
The inner circuit board
is malfunctioned. Please
proceed to your nearest
warranty service center
for support.
E1
After Function is selected,
continuous and fast-paced
“beeping” sound is heard.
Has the cookware been
placed on top and in the
middle of the cooking
zone? Are the material, size
and shape of the cookware
compatible?
E2
The unit suddenly stop
working, continuous and
fast-paced “beeping” sound
is heard.
Ambient temperature is too
high? Are the ventilation
holes blocked?