01
Thank you for purchasing a BlueSpot product, you can find further information on our range at
www.BlueSpot.uk.com
.
Please ensure that you are using the product correctly and that all guidance
and cautions are followed in accordance with the instructions. Please retain these instructions for
future reference.
General Information
Please make sure that you read these instructions carefully in order to avoid injury when using the work
light. Follow all health and safety rules and regulations. If in doubt and available please contact a more
knowledgeable source.
DO NOT use if damaged.
•
BE AWARE
this product is not waterproof.
•
ALWAYS
check the work light for any damage before use. Check for damage to the plug, cable,
lens or light casing. If light is damaged do not use as this may cause damage to property or cause
injury.
•
ALWAYS
inspect the power supply cables and plugs for wear or damage before using the work
light. Ensure all the connections are secure.
•
ALWAYS
check the voltage rating on the work light suits the power supply that you are going to
use. Check the plug is fitted with the correct fuse.
•
ALWAYS
dress appropriately and wear the correct PPE equipment if required.
•
ALWAYS
ensure the work light is disconnected from the power source when not in use.
•
ALWAYS
ensure the work light has been turned off and disconnected from the power supply
before performing any maintenance or storing.
•
Before storing the work light ensure that it has cooled down completely and is dry. Store the work
light in a cool dry area that is out of reach of children.
•
Position the work light where it is not likely to be knocked or cause a hazard while working.
•
Maintain the lamp in good and clean condition for best and safest performance.
•
Keep the work area clean and uncluttered.
•
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
•
Keep children and unauthorised persons away from the work area.
Safe use
