Mobile
phone
PC
Congratulation! You have got a Mobile HIFI system.
Please read this manual thoroughly, and set up your Bluetooth wireless music World.
1. Check the package contents
The package include:
USB charging Cable
Power Adapter
Quick Guide
Bluetooth Stereo
Receiver
Stereo RCA interconnect cable
Power LED
Connect indicator
Connect
Button
RCA jack
USB jack
Bluetooth Stereo Receiver Quick Guide
To pair with your phone
1. Enable Bluetooth on your phone.
2. Turn on your mobile phone.
3. Turn on the receiver by pressing reset key.
4. In the phone's Bluetooth menu, search for devices.
5. Select Bluexon .
6.
5. Using with your mobile phone
6. Using with your PC
4. How to connect
2. Charge the battery
Plug the USB cable
Plug the power adapter
3. To turn on the power
To turn on the power,
Press and hold the connect button (about 2 seconds)
until the Connect indicator light blue.
To turn off the power,
Press and hold the connect button (about 2 seconds)
until the Connect indicator light off.
Blue LED
power is on
Blue flashing LED
finish connected successfully.
Red LED
Battery is charging, turns green when charged fully.
Red flashing LED
Battery is low
2.
1. Connect the Bluetooth receiver to your stereo system by the enclosed
Stereo RCA interconnect cable.
Or
connect the earphone to the RCA
jack of the receiver.
4. Sit back, relax and enjoy your music!
Ensure your mobile or PC was built in BLUETOOTH A2DP profile before
using. Remark: A2DP means Advanced Audio Distribution Profile.
The device can work continuously for six hours. If it is almost no power,
the power LED will flash red, please using the power adapter or the USB
cable to charge.
Plug one end of the USB jack into the receiver, and insert the other end to
a USB port of your PC. (Make sure your PC is on)
or
Plug one end of the USB jack into the receiver, and the other end into the
power adapter. (Make sure the power adapter connected to the power)
When it is being charged, the power LED keeps lighting red. If it is fully
charged, the power LED will turn green.
Note
: Before the first use, charge the battery fully for about
10 hours. Thereafter, recharging takes about 90 Minutes.
3. Open your favorite play list and press
Play from your mobile or PC.
Before using, please check if your mobile phone has Bluetooth A2DP profile, if
you are not sure of that, please consult with your mobile provider. If your mobile
phone doesn't support A2DP, you have to buy a Bluetooth transmitter to pair with
the receiver.
Enter the PIN code 0000
. Select and play the Music on your mobile
phone, select Use Bluetooth . Your mobile phone will be connected
with the receiver and send the music. To terminate the music transportation,
select Use
mobile .
For further details, please refer to your user manual of mobile phone.
Before using, please check if your PC has Bluetooth A2DP profile,
if you are not sure of that, please consult with your PC provider.
If your PC has no A2DP profile, you can upgrade it by a Bluetooth
Audio Dongle, after finishing upgrading Bluetooth your PC, you
can pair the receiver.
Connect the mobile phone or PC to your Bluetooth stereo receiver.
The Blue LED on the receiver will flash when connected.
(Please refer the chapter 5 and 6)
Earphone
Stand for receiver
