15
PBA
BACnet protocol over IP (Ethernet)
The controller is set for use, in read and write mode, of the BACnet port on IP protocol.
By default, the programming gives read-only access to the control of the unit. Enabling of read/write access
should be requested when ordering.
PSN
SNMP protocol
The accessory consists of a gateway that allows Ethernet connection to a SNMP manager supervision system.
The use of this accessory causes the RS485 serial port to be unavailable.
GLO
Modbus Lonworks Gateway
With this accessory, a RS485/Lon gateway is installed inside the electrical control panel.
By default, the programming gives read-only access to the control of the unit. Enabling of read/write access
should be requested when ordering.
SMAR Smartlink
This accessory makes it possible to connect the controller of the unit with the control
-
ler of a Swegon GOLD™ air handling unit via a simple serial cable, so allowing their operat
-
ing logics to be merged into a single consciousness that pursues the maximum energy efficiency of the
system. The RS485 serial interface is already included and dedicated to connection with Swegon units.
The option is incompatible with:
• double set point
•
variable set point with remote signa
•
summer/winter selection by digital input
•
set point compensation depending on external air temperature
•
multilogic
• all communication protocols.
SW4P Network switch with 4 ports
The accessory includes installation in DIN rail of a professional 4-port network switch.Requires Blueye via
Ethernet.
SW8P Network switch with 8 ports
The accessory includes installation in DIN rail of a professional 8-port network switch.
Requires Blueye via Ethernet.
WIFI Wi-Fi
The accessory includes the supply of a Hot Spot WiFi already installed, wired and configured, complete with
antenna.This accessory requires the Ethernet port of the controller to be available or, alternatively, a network
switch with at least one available port to be present in the machine.
