BlueBox IDTRONIC GEN2 ADVANT UHF, Руководство пользователя

Страница: 28 / 102

BLUEBOX Advant UHF Page 28 of 102
Parameter Description
IP0
…
IP3
IP address.
PortH TCP communication port. MSB.
PortL TCP communication port. LSB.
Subnet0
…
Subnet3
Subnet mask.
Gateway0
…
Gateway3
Gateway address.
The changed Ethernet parameters become effective only after a
reset of the
BLUEBOX . Reset the BLUEBOX using the ‘Reset
Device’ command or via a hardware reset.
In case of MODBUS/TCP communication interface (items 5222U-
MB-S, 5238U-MB-S, 5232U-MB) the TCP communication port is
internally fixed to 502 which is the TCP communication port of the
MODBUS/TCP communication protocol.
3.2.2 ProfiBus
Hereinafter the configurable ProfiBus parameters of the BLUEBOX .
Parameter Description Range Default
ProfiBus
Address
The address of the reader in the ProfiBus
network.
1 ... 126 126
ProfiBus Buffer
Length
The ProfiBus IN/OUT buffer size in bytes.
8, 12, 16, 20,
32, 64
16
The ProfiBus parameters are stored in configuration page nr. 0x03 and are
managed through the ‘Read Configuration Parameters’ and ‘Write Configuration
Parameters’ commands as described in protocol technical manuals are the
parameters 1…7 fields with default values are: