BlueBox IDTRONIC GEN2 ADVANT UHF, Руководство пользователя

Страница: 27 / 102

BLUEBOX Advant UHF Page 27 of 102
Parameter Description
• Bit 4: Transponder type information in Data Request and Queue Request
commands;
• Bit 3: To enable the ‘spontaneous’ mode;
• Bit 2: Trigger ‘continuous’ mode with inputs (see the I/O parameters);
• Bit 1: Not used;
• Bit 0: To disable the ‘continuous’ mode.
3.2 Configuration Parameters
Hereinafter the configurable operational parameters of the BLUEBOX .
3.2.1 Ethernet
Hereinafter the configurable Ethernet parameters of the BLUEBOX .
Parameter Description Range Default
IP Address IP address. - 192.168.4.200
Port TCP communication port. 0 … 65535 3000
Subnet Subnet mask. - 255.255.255.0
Gateway Gateway address. - 0.0.0.0
The Ethernet parameters are stored in configuration page nr. 0x80 and are
managed through the ‘Read Configuration Parameters’ and ‘Write Configuration
Parameters’ commands as described in
protocol technical manuals where the
parameters 1…14 fields and default values are:
1 2 3 4 5 6 7
IP0 IP1 IP2 IP3 PortH PortL Subnet0
0xC0 0xA8 0x04 0xC8 0x0B 0xB8 0xFF
8 9 10 11 12 13 14
Subnet1 Subnet2 Subnet3 Gateway0 Gateway1 Gateway2 Gateway3
0xFF 0xFF 0x00 0x00 0x00 0x00 0x00
Where: