2
This machine is intended for commercial use. It is
suited to pick up dirt, dry debris and dust in an
indoor environment and is not constructed for any
other use. The pick up of any type of fluid or
dangerous dust is prohibited. Use only
recommended accessories.
The following safety alert symbols are used
throughout this manual as indicated in their
description.
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially
dangerous conditions to the operator or equipment:
FOR SAFETY:
1. Do not operate machine:
−
Unless trained and authorized.
−
Unless operator manual is read and
understood.
−
In flammable or explosive areas.
−
Unless cord is properly grounded.
−
With damaged cord or plug.
−
If not in proper operating condition.
−
On wet surfaces.
−
In outdoor areas.
−
Without bag and/or filters in place.
−
With the use of additional extension
cords. Only use manufacturer’s
extension cord equipped with machine,
which has proper capacity and is
grounded.
2. Before operating machine:
−
Make sure all safety devices are in place
and operate properly.
3. When using machine:
−
Do not run machine over cord.
−
Do not unplug by pulling on cord.
−
Do not stretch cord.
−
Do not handle plug with wet hands.
−
Keep cord away from heated surfaces.
−
Do not pick up burning or smoking
debris, such as cigarettes, matches or
not ashes.
−
Report machine damage or faulty
operation immediately.
4. Before leaving or servicing machine:
−
Turn off machine.
−
Unplug cord from wall outlet.
5. When servicing machine:
−
Unplug cord from wall outlet.
−
Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
−
Use manufacturer supplied or approved
replacement parts.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Unplug machine before
servicing.
WARNING: Flammable materials can cause an
explosion or fire. Do not pick up.
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce
the risk of electric shock. This machine is equipped
with a cord having an equipment-grounding
conductor and grounding plug. The plug must be
plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances. Do not remove grounding
pin; if missing, replace cord before use.
WARNING: Improper connection of the
equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician
or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the
plug provided with the machine - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
This machine is for use on a nominal 120-volt circuit
and has a grounding plug that looks like the plug in
the sketch above. Make sure that the machine is
connected to an outlet having the same
configuration as the plug. No adapter should be
used with this machine.
SAFETY PRECAUTIONS
GROUNDED OUTLET
(3 HOLE)
GROUNDING PIN
Home
Find...
Go To..
