D1000 SATCOM Terminal User Guide v2.2
Page
17
of
21
© 2021 Blue Sky Network, All Rights Reserved
INBOX
The Inbox screen displays information about the text messages currently stored in the D1000. Click on
the Subject, Sender, and Date fields to see a message. The size is in 30-byte units. You can also view
message subsets such as
“next,” “first,” and “last,” by choosing the corresponding hyperlinked text.
Your Message Screen
Each text message line contains a hyperlink to the Your Message screen where the complete content is
displayed, including the sender, subject, date, and time. You can delete and reply to messages here.
Upon reading any text message, including previously read messages, the MSG LED will turn off.
COMPOSE
Create text messages on this screen by completing 4 fields: To, Address, Subject, and message body.
If sending a message to a user on the Blue Sky Network website, type [email protected] in the To
field (future versions of the firmware will feature an address book). Example: [email protected].
When sending a message to any other email address, simply enter the address in the To field.
Tick the
‘Save’ checkbox before you send a message to save an email address in the internal address
book. You can save up to 10 email addresses, and they will remain stored even after power off.
NOTE
: Power off
deletes all messages
in the inbox; they will
not be saved after
power off.
NOTE
: Maximum
length of the message
is 1800 characters.
