-16-
Revision 5/F3534
©
Moffat Ltd, April 2005
Turbofan Convection Oven
IMPORTANT:
THIS UNIT IS NOT
WATER PROOF.
DO NOT USE A WATER JET SPRAY TO
CLEAN INTERIOR OR EXTERIOR OF THIS
UNIT.
WARNING: ALWAYS TURN THE
POWER SUPPLY OFF BEFORE
CLEANING.
EXTERIOR
Clean with a good quality stainless steel cleaning
compound. Harsh abrasive cleaners may
damage the surface.
INTERIOR
Ensure that the oven chamber is cool. Do not use
wire brushes, steel wool or other abrasive
materials. Clean the oven regularly with a good
quality oven cleaner. Take care not to damage
the fan or the tube at the right side of the oven
which controls the thermostat.
OVEN RACKS
To remove, slide out to the stop position, raise
the front edge up, and lift out.
SIDE RACKS
Undo the thumbscrew (anti-clockwise rotation)
securing rack to oven wall, swing rack towards
centre of oven to disengage location pin at front
of side, and pull rack forward to remove. To
replace, engage rack in rear holes, swing towards
side of oven to engage in front hole, and replace
thumbscrew.
FAN BAFFLE
To remove, unscrew the oven lamp glass and lift
the baffle out. To replace, locate the bottom edge
of the baffle over the bottom element terminal
plate and secure in place with the oven lamp
glass.
4. MAINTENANCE
OVEN SEALS
To remove, hold at their centre point and pull
forward until they unclip. Remove side seals first,
then top and bottom. The seals may be washed
in the sink, but take care not to cut or damage
them. To replace, ensure that the lip is facing the
oven opening. Fit the top and bottom seals first,
then the side seals.
OVEN DOOR GLASS
Clean with conventional glass cleaners
IMPORTANT:
DO NOT OVER- TIGHTEN
THE LAMP GLASS.
4.1 CLEANING
WARNING: ALL INSTALLATION AND SERVICE REPAIR WORK MUST BE CARRIED OUT BY
QUALIFIED PERSONS ONLY.