Blue-Ray Biotech MiniTurbo, Руководство по эксплуатации, Страница: 14 / 22

MiniTurbo Operation Manual
10
4.6 Main Screen
The information displayed on the main screen will include the protocol number, the temperature of
the heater, and the protocol remaining time as in the figure below.
Figure 8. Main screen overview.
4.7 Start Running
After the MiniTurbo has recognized the protocol in the Protocol Chip, please push the start button
to run the protocol. While the protocol is running, the start button acts as a change-over switch that
toggles the main screen display between remaining time and heater temperature. If necessary, the
start button can be pressed for 3 seconds to stop the protocol.
Figure 9. Main screen shows remaining time during running.
Figure 10. Main screen shows heater temperature during running.
No Card
Heater: OFF 60
℃
105
℃
HR
MIN
SEC
Protocol Number
Protocol Remaining Time
Temperature
of Heater
Heater 105
℃
Heater Temp.
Heater: OFF
HR
MIN
SEC
Protocol Remaining Time
Heater Setting
Temp.