Blue Diamond EXTREME DUTY SNOW BLOWER 68, Руководство по эксплуатации и обслуживанию, Страница: 44 / 70

44
Extreme Duty Snow Blower Operation and Maintenance Manual
Maintenance
Cleaning The Attachment
Park the machine and attachment on a flat level
surface. Lower the attachment flat on the ground.
Stop the engine.
Leave the operator’s position. See “Leaving The
Operator’s Position” on page 24.
Disconnect attachment hydraulic hoses from the
machine.
Enter the operator’s position. See “Entering The
Operator’s Position” on page 24.
Slowly raise the machine’s lift arms, while tilting
the snow blower forward (down) until the front of
the snow blower contacts the ground.
Stop the engine, engage parking brake and leave
the operator’s position. See “Leaving The
Operator’s Position” on page 24.
Use water or air pressure to clean debris from the
snow blower.
Be careful when removing any obstructions that
are wrapped around auger(s).