Blue Coat SG510 Series, Руководство по установке

Страница: 46 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 46
Page 5 displays. This page explains how to access the SG510 from an SSH
Client or with a Web browser (see
“Logging on to the SG510” on page 62 for
more information).
Figure 2-13: Initial Setup—Page Five
9
To log in to the serial console right away, press <Enter> three times.
A menu displays, offering two choices:
1) Command Line Interface
2) Setup Console
10
Enter
1
to select the CLI (see “Logging on to the SG510 CLI” on page 64 for
information about using the SG510 CLI). To access the SG510 Management
Console, enter the following address into your Web browser:
https://[IP Address]:8082/
where
[IP Address]
is the IP address that you configured for this SG510 in
Step 4.
See “Logging on to the SG510 Management Console” on page 62 for more
information about accessing the SG510.
---------------------- (page 5 of 5) ---------------------
DIRECTIONS:
The ProxySG Appliance has been successfully configured
to use IP address: "10.25.36.47"
You can connect to the command line interface or Web
interface to perform additional management tasks.
To connect to the command line interface, open the
following location from your SSH application:
10.9.16.85
To connect to the Web management interface, go to the
following location with your web browser:
https://10.9.16.85:8082/
---------------- CONFIGURATION COMPLETE ------------------
Press "enter" three times to activate the serial console