Blue Coat SG210 series, Руководство по установке

Страница: 22 / 54

22 Blue Coat SG210 Installation Guide
6
The SG210 is configured and page 5 displays. This page explains how to access the SG210 from an SSH
Client or with a Web browser. See
Section E: “Logging in to the SG210 on page 30 for more information.
Figure 2-14: Initial Setup—Page Five
7
To log in to the serial console right away, press < Enter > three times.
A menu displays, offering two choices:
1) Command Line Interface
2) Setup Console
8
Access the CLI or Management Console:
❐
Enter
1
in the Serial Console menu to select the CLI.
See “Logging in to the SG210 CLI” on page 31 for information about using the SG210 CLI.
❐
To access the SG210 Management Console, enter the following address into your Web browser:
https:// proxysg_IP :8082/
where proxysg_IP is the IP address that you configured for this SG210.
See “Logging in to the SG210 Management Console on page 30 for more information about accessing
the SG210.
---------------------------------------
-- (page 5 of 5) ---------------------
DIRECTIONS:
The SG Appliance has been successfully configured to use IP address:
"10.0.1.246"
You can connect to the command line interface or Web interface to perform
additional management tasks.
To connect to the command line interface, open the following location from your
SSH application: 10.0.1.246
To connect to the Web management interface, go to the following location with
your web browser:
https://10.0.1.246:8082/
-------------- CONFIGURATION COMPLETE------------------
Press "enter" three times to activate the serial console
Executing image: Version: SGOS 5.2.1.9, Release id: 30429 Debug
Interface 0:0: MAC address 00:00:00:00:00:00, no link
Interface 0:1: MAC address 00:00:00:00:00:00, full duplex, 100 megabits/sec
Management Console started