
Chapter 2: First-Time Configuration
13
4
Verify that the network link is established by checking the network connection LEDs at the back of the
SG200. If the network connection is functioning, the left-hand LED on each connection glows green.
Figure 2-2: Verify the Network Connection
If the network connection LEDs are not green, check the following:
•
Verify that each cable is connected properly, such as to a switch or a hub.
•
Try using a different network connection cable.
5
Do one of the following:
❐
If your SG200 is a 200 A or 200 B, go to
“200 A and 200 B—Initial Configuration with a Web Browser”
❐
If your SG200 is a 200 C, go to
“200 C—Initial Configuration Using the Setup Wizard”
4 Verify that
these LEDs
are green
Содержание SG200 200 A
