Blow BL012, Руководство пользователя

Страница: 7 / 13

10.Reboot device Command
: RESET#
※
The device will restart itself without changing any settings.
11.Initialization Command
: RFS#
※
This is to make all settings back to the factory default,except the IP.
※
Only the center number has the right to operate.
※
please caution to use.
12.Working Modes
Command
: WKMD,2# (super-long standby mode)
WKMD,1# (power-saving mode)
WKMD,0# (safe mode)
※
the
default mode is safe mode.
※
Super-long standby mode :The platform only work when you send a SMS command
to get the location,this is the most power-saving.
※
Power-saving mode :The platform only upload LBS location and the location precise
varies according to the cities where it is located . It is purely power-saving.
※
Safe mode :The platform will upload GPS location with high precision in real time.
But it is very power-consuming.
13.Set up data upload time interval
Command
: WKMD,0#20#
※
WKMD,0# represents the safe mode
※
time can be from 20s to 120s. The time must be a multiple of 10.
※
the default is 20s
※
after sending the command,it will
reply:WKMD,0:OK!
14.SOS Alarm
Command: SK,1# (Alarm on)
Command: SK,0# (Alarm off)
※
Press the SOS in 3seconds,it will call the authorized number.
※
After the first operation,please wait at least 3minutes to test
again,otherwise it won’t work.
How to Connect Device to the Platform for real time tracking via GPRS