Blow 78-633, Руководство пользователя

Страница: 15 / 20

INSTRUKCJA OBSŁUGI
15
Configuration and Operation by SMS
To Set the Center Number
Command
: CENTER,000000,phone number#
NOTE
:The letters or symbols should be English and the letters should be in capital.
Example
:CENTER,000000,123456789#
·
Using your mobile phone,send the above command to the phone number of the device,it will reply: BD OK!
·
Center number can control the oil and power and resume factory settings
·Only one number can be center number.
GPRS Setting
In order to use the GPRS function,the user needs to setup the APN by sending SMS command.
--what is APN? Access Point name(APN) is the name used to identify a general packet radio service (GPRS)
bearer service in the GSM mobile network. The APN defines the type of service that is provided in the
packet data connection.
·Make sure that the SIM card in the tracker supports the GPRS function.
·The APN can be acquired from your local GSM operators.
Command
: APN,APN information,user name,password#
Note
:Some APN without user name and password,so please leave it blank.
For example
: APN,internet,123,456# (with the user name and password)
APN,internet# (without the user name and password)
· please set it up when the device can not connect with the web platform or the APP.
· After sending the command,it will reply:APN OK!
Location request
Reply with coordinates and web link
Command:
URL#
The device will reply :the IMEI No,the date,the time,the map link,the longitude and latitude
Example: 3568xxxxxxx2219<01-03 14:59:43>
http://maps.google.com/maps?q=N22.669534,E114.011888
Click on the link then the location can be shown directly on Google Map on your mobile
phone.
Vibration Alarm
Command
: VA,ON# (turn on this function)
VA,OFF# (turn off this function)
·Please moving the device after 5minutes,then it will send message to the center number:vibration
alarm,please note!
·This function is off by default setting.
·After sending the command,it will reply:VA OK!
Change the way of alarm
Command:
MC,1# (alarm by sms)
Command:
MC,2# (alarm by calling)
Command:
MC,3# (alarm by sms and calling)
Command:
MC,0# (turn off all the way of alarm)
·this is used to change the way of alarm of vibration and over-speed.