28mm WWII Guard Tower
B28-WW2-101
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember
to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
A full-colour copy of these instructions can be found on our website: www.blotz.co.uk
First remove the platform and the four walls from
the sprue, laying them out as shown above.
Glue the walls to the platform, with the lugs on the
platform slotting into the holes provided in the
walls. Allow to dry.
Remove the six roof supports (shown above) from
the sprue.
Glue the roof supports together to form two pieces
(as shown). Leave to dry.
