It is recommended to have a regular schedule of care and
Safety
These instructions are for your safety. Please read through
them thoroughly prior to installation and retain them for future
reference.
accordance with local regulations (IET wiring regulation
BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc. from the product.
Decide on the appropriate location for your product.
CAUTION: IP67 & IP65 is guaranteed when the product is
properly installed and sealed.
Always avoid the product to be located at corrosive environment.
Always refer to the installation drawing for the orientation of the
product.
Maximum temperature of contact: 100°C. Intended for use
in pedestrian or cycling zones. Acceptable static load: 5kN.
Caution: Do not let plants grow close to the lamp.
Wiring diagram is for reference only. Always refer to the terminal
marking for wiring. Ensure that all electrical connections are tight
and that no loose strands are left out of the terminal block.
When the product does not light after installation:
> Ensure there is no electricity failure
> Ensure all the connections are secured
If you have any doubt about installation / use of this product,
Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
maintenance to keep the surface condition well.
Technical Data
Supply Voltage:
220-240 V~, 50 Hz
Bulb Type:
1 x Max. 11 W CFL or LED (11 W) GU10
(check bulb dimensions in relation to space
available)
Conformity with all relevant EC Directive
requirements.
Class I product, must be connected to
earth.
IP65
Jet-proof.
IP67
Water tight: temporary immersible up
to 1m
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or local store for
recycling advice.
xxWyy
xx-year; yy-week of the year
Warranty Period and Conditions
At Blooma, we devote special attention to selecting high-quality materials and use manufacturing techniques that enable us to create
designer and durable product ranges.
That is why we offer a 2-year warranty against product manufacturing defects. This product is under warranty for 2 years as from the date of
purchase, for normal, non-professional household use.The warranty shall only apply upon presentation of the till receipt or the invoice. Keep
your proof of purchase in a safe place.
The warranty covers product breakdowns and malfunctions under the condition that the product is used in accordance with its intended use
and subject to installation and maintenance in accordance with good practice and the information contained in the user’s manual.
This product must be installed so that it may be later removed without damaging it.
This contractual warranty does not cover defects and damage caused by the natural wear of parts, bad weather
freezing, damage caused by water quality (hardness, aggressiveness, corrosion, etc.), by the presence of foreign bodies transported by
negligence, accident or maintenance that is defective or does not comply with good practice or the information in the user’s manual.
The following are also excluded from the warranty: harmful consequences due to the use of accessories and/or non-original equipment
The warranty is limited to those parts recognised as defective. Under no circumstances shall it cover fringe expenses (travel, labour) and
direct and consequential damage.
This guarantee is in addition to and does not affect your statutory rights.
3663602892878-Blooma-A5-IM-V03.indb 3
30/10/2017 16:37
It is recommended to have a regular schedule of care and
Safety
These instructions are for your safety. Please read through
them thoroughly prior to installation and retain them for future
reference.
accordance with local regulations (IET wiring regulation
BS7671).
Check the pack and make sure you have all of the parts listed.
Remove all packaging, wrap etc. from the product.
Decide on the appropriate location for your product.
CAUTION: IP67 & IP65 is guaranteed when the product is
properly installed and sealed.
Always avoid the product to be located at corrosive environment.
Always refer to the installation drawing for the orientation of the
product.
Maximum temperature of contact: 100°C. Intended for use
in pedestrian or cycling zones. Acceptable static load: 5kN.
Caution: Do not let plants grow close to the lamp.
Wiring diagram is for reference only. Always refer to the terminal
marking for wiring. Ensure that all electrical connections are tight
and that no loose strands are left out of the terminal block.
When the product does not light after installation:
> Ensure there is no electricity failure
> Ensure all the connections are secured
If you have any doubt about installation / use of this product,
Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
maintenance to keep the surface condition well.
Technical Data
Supply Voltage:
220-240 V~, 50 Hz
Bulb Type:
1 x Max. 11 W CFL or LED (11 W) GU10
(check bulb dimensions in relation to space
available)
Conformity with all relevant EC Directive
requirements.
Class I product, must be connected to
earth.
IP65
Jet-proof.
IP67
Water tight: temporary immersible up
to 1m
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or local store for
recycling advice.
xxWyy
xx-year; yy-week of the year
Warranty Period and Conditions
At Blooma, we devote special attention to selecting high-quality materials and use manufacturing techniques that enable us to create
designer and durable product ranges.
That is why we offer a 2-year warranty against product manufacturing defects. This product is under warranty for 2 years as from the date of
purchase, for normal, non-professional household use.The warranty shall only apply upon presentation of the till receipt or the invoice. Keep
your proof of purchase in a safe place.
The warranty covers product breakdowns and malfunctions under the condition that the product is used in accordance with its intended use
and subject to installation and maintenance in accordance with good practice and the information contained in the user’s manual.
This product must be installed so that it may be later removed without damaging it.
This contractual warranty does not cover defects and damage caused by the natural wear of parts, bad weather
freezing, damage caused by water quality (hardness, aggressiveness, corrosion, etc.), by the presence of foreign bodies transported by
negligence, accident or maintenance that is defective or does not comply with good practice or the information in the user’s manual.
The following are also excluded from the warranty: harmful consequences due to the use of accessories and/or non-original equipment
The warranty is limited to those parts recognised as defective. Under no circumstances shall it cover fringe expenses (travel, labour) and
direct and consequential damage.
This guarantee is in addition to and does not affect your statutory rights.
3663602892878-Blooma-A5-IM-V03.indb 3
30/10/2017 16:37
This product complies with conformity
requirements of the applicable UK
Regulations.
This product complies with conformity
requirements of the applicable
European Regulations or Directives.
Light source replaceable by an end-user.
This product contains a light source of energy efficiency
class E
