Blodgett MARK V-100 XCEL Скачать руководство пользователя страница 48

Страница: 48 / 49

Maintenance

cleaning and Preventative maintenance

DailY cleaninG
oven cool Down:

1. Turn the oven to COOL DOWN.

NOTE: The doors may be opened to speed the

cooling process.

cleaning the exterior

1. Saturate a cloth with a mild soap and water mixture.

Wipe the oven when it is cold.

2. Dry the oven with a clean cloth.
3. Heat tint and heavy discoloration may be removed

with any non-toxic, non-caustic, commercial oven

cleaner and stainless steel polish.

cleaning the interior

Deposits of baked on splatter may be removed with any

non-toxic, non-caustic, food safe, commercial oven clean-

er.
1. Apply cleaner following the manufacturer’s direction.

Always rub with the grain of the metal.

WeeklY cleaninG

1. Remove any loose debris or particle buildup from the

racks, rack supports, baffle, blower wheel and tem

perature probe.

monthlY cleaninG

Clean racks, rack supports, baffle and blower wheel

Remove the racks, rack supports and baffle.

2. Hold the blower wheel with a gloved hand.
3.

Use an L-shaped brush to clean the fins on the blow

er wheel.

4. Use a hand brush to clean the center portion of the

blower wheel.

5. Wipe around the fan with a damp towel.
6.

Soak racks, supports and baffle in a solution of non-

toxic, non-caustic, food safe, commercial oven clean-

er. Allow to soak overnight if necessary.

7. Reinstall parts.

clean temperature probe

1. Use a damp towel to wipe the probe. Handle with

care.

clean cooling fan

1. Brush off the cooling fan located on the back of the

oven behind the control compartment.

Preventative maintenance
annual maintenance

The following checks should be part of an annual sched-

uled maintenance. This maintenance must be performed

by an authorized service agency. Contact your local

Blodgett service company, a factory representative or the

Blodgett Oven company.
1.  Check venting system.
2.  Check temperature calibration.
3.  Adjust and grease door switch for proper closure.
4.  Clean any debris out of control tray. Check for loose

connections. Replace any discolored connections.

Retorque all electrical connections between the ele

ment and contactors.

WarninG!!

always disconnect the appliance from the

power supply before servicing or cleaning.

Содержание MARK V-100 XCEL


















































Результаты поиска

Содержание MARK V-100 XCEL

Отзывы:

Похожие инструкции для MARK V-100 XCEL

Бренды по названию

Популярные бренды

Blodgett MARK V-100 XCEL, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание MARK V-100 XCEL

Отзывы:

Похожие инструкции для MARK V-100 XCEL

Бренды по названию

Популярные бренды