Blodgett BCX-14G Скачать руководство пользователя страница 117

Страница: 117 / 117

BCX-14G

Printed in U.S.A.

NOTE:

FOR COMMERCIAL USE ONLY

APPROVAL/STAMP

P/N 39453 Rev AB (3/18)

SHORT FORM SPECIFICATIONS:

Provide Blodgett Combi model BCX-14G single, gas combination-oven/steamer. Unit shall have the ability to cook with pressureless steam (212F),

hot air, or combination of steam and hot air (with an operating range 140F to 500F), vario-steaming (operating range 140F to 212F), low temperature cooking and holding, rethermal-

izing, cool down mode and our Exclusive Steam on Demand steam injection system. Unit shall have programmable manual control capable of storing 100 recipes and USB connection.

Oven capacity to accept 7ea 18x26 bake pans or 14ea 12x20x2.5” full size steam table pans with 3-1/4” spacing. Front access service user interface control panel and service diagnosis

system. Unit shall be constructed with a fully welded stainless steel frame. Cooking chamber shall be constructed with 304 series with bright-annealed stainless steel finish and coved

corners. Retractable hose reel (excluding top sections) to include front water shut off valve. Unit shall include a four speed, bi-directional fan with vent switch to control humidity in

the cooking chamber. Dual pane thermal glass window with 180 degree door swing, two-step safety door-latch with adjustable door hinges, door mounted drip pan. Unit to include

a detachable 4” core temperature probe and halogen lights. Supply with exclusive time to delime indicator with adjustable settings of 30, 60 or 90 hours of run time, semi-automatic

deliming system. Where applicable, quantities in this spec are doubled for stacked units. A start-up inspection service will be performed by our factory-authorized agent at no cost to

the operator. One-year parts and labor warranty, standard.

GAS SUPPLY

(per section)

3/4” NPT

Inlet Pressure:

Natural - 7.0” W.C. static to unit Propane - 14.0” W.C. static to unit

Maximum Input:

Hot Air - 65,000 BTU/hr Boiler - 50,000 BTU/hr Total Input - 115,000 BTU/hr

WATER SUPPLY & DRAIN:

Good quality water feed is the responsibility of the owner. Water quality must be within

the following general guidelines.
TDS: 40-125 ppm

Hardness: 35-100 ppm

pH: 7.0 - 8.5

Silica: <13 ppm

Chlorides: <25 ppm

Chlorine: <0.2 ppm

Chloramine: <0.2 ppm
The best defense against poor water quality is a water treatment system designed to

meet your water quality conditions. Blodgett offers optional systems from Optipure.

Pressure:

40(min)-50(max) PSI

Connections:

2” drain connection - max. drain temperature 140°F (60°C)

3/4” garden hose cold water

The drain piping must consist of temperature resistant material, greater than 160°F, and

be of adequate diameter not to cause flow restriction. Improper materials may deform

and cause restrictions, thus affecting performance.

Appliance is to be installed with backflow protection in accordance with federal, state or

local codes.

SHIPPING INFORMATION:

Approx. Weight:

Single - 645 lbs. (293 kg) Double - 1320 lbs. (599 kg) Stand w/guides - 140 lbs. (64 kg)

Crate sizes (per section):

44.5” H x 42” W x 54.25” D (1130 x 1067 x 1378mm)

DIMENSIONS:

Floor space:

42.30” x 40.19” (1074 x 1021mm)

Unit Height:

Single

36.16” (919mm)

Double

69.22” (1758mm) without casters/legs

Additional Height:

Low profile caster for stacked units 4” (101.6mm)

6” adjustable legs

6.88” - 8” (174.6-203.2mm)

6” adjustable seismic legs

6.63” - 8” (168.3-203.2mm)

25” adjustable legs

25.25” - 26.38” (641.4-670mm)

Stand w/rack supports

22.5” - 23.63” (571.5-600.1mm)

Stand w/rack supports on casters

22.63” (574.7mm)

OVEN CLEARANCES:

Right Side

1” (25.4mm)

Left Side

6” (152.4mm)

Rear

6” (152.4mm)

MINIMUM ENTRY CLEARANCE:

Uncrated

33” (838mm) after adjustment of flue brackets

Crated

42” (1066.8mm)

POWER SUPPLY

(per section):

Standard

115VAC, 12 amp, Nema 5-20R dedicated receptacle

Option

208-240VAC, 6 amp, Nema 6-15 dedicated receptacle

Export

Export voltages available on request

Blodgett recommends a Pass & Seymour, model 2097, GFCI due to the

use of a variable frequency drive. Must be hard wired in some cases.

NOTE:

The company reserves the right to make substitutions of components

without prior notice

DIMENSIONS ARE IN INCHES (MM)

0 (0)

5.00 (127)

2.31 (59)

3.00 (76)

33.06 (840)

35.37 (898)

36.06 (916)

38.06 (967)

66.12 (1679)

69.22 (1758)

0(0)

5.59 (142)

23.59 (599)

40.16 (1020)

2.59 (66)

REAR VIEW

0 (0)

3.00 (76)

5.00 (127)

2.31 (59)

33.06 (840)

36.16 (919)

0 (0)

2.59 (66)

5.59 (142)

23.59 (599)

F
U

40.16 (1020)

0 (0)

72.7 (1848)

43.3 (1100)

Front of oven

with door closed

TOP VIEW

Unfiltered Water - Condensate, cold only

Filtered Water - Boiler, hot or cold

Electric

Drain

Gas

117

Содержание BCX-14G






















































































































Результаты поиска

Содержание BCX-14G

Отзывы:

Похожие инструкции для BCX-14G

Бренды по названию

Популярные бренды

Blodgett BCX-14G, Руководство по устранению неисправностей

Результаты поиска

Содержание BCX-14G

Отзывы:

Похожие инструкции для BCX-14G

Бренды по названию

Популярные бренды