Blockaudio LINE BLOCK, Руководство пользователя

Страница: 18 / 21

18
DISPLAY SETUP Menu
Move the cursor to the desired position, select and then adjust value/option according the table below.
SETUP Menu
STANDBY
BATTERY
POWER AMP…
SETTINGS >
CANCEL
SETTINGS
CLASS
BALANCE
PHASE
AUTO STANDBY
ADVANCED >
ADVANCED
INPUTS >
DISPLAY >
VOLUME >
PAIR REMOTE
FACTORY RESET
DISPLAY Menu OPTIONS DEFAULT
BRIGHTNESS AUTO / 20 / 40 / 60 / 80 / 100 % AUTO
TIME-OUT OFF / 2 to 10 sec. / DISPLAY OFF OFF
CONTENT FULL / SMART FULL
CUST. INPUT NAME FULL: N/A, SMART: None, AUX, CD, SA-CD, … N/A
TEMPERATURE UNITS
1)
°C / °F °C
BRIGHTNESS: This setting lets you manually adjust the Display and status LED brightness. While AUTO option
chosen, the brightness will be adapted depending to ambient light.
TIME-OUT: This setting lets you choose how long the display remains lit after the last time a control is operated.
In OFF mode display remains on, in DISPLAY OFF mode display remains off also during volume control
operation.
CONTENT: This setting lets you choose the display mode:
• FULL: In this mode, the complete content of the display will be shown, see chapter DISPLAY for further
details.
• SMART: Only the most important information’s for usual usage will be shown, see chapter DISPLAY for
further details. The Input name can be customized for this display mode.
CUST. INPUT NAME: This option, while Smart content mode is chosen, offers you to rename the inputs by
preset labels or even to create your own names.
• Preset labels: AUX, CD, SA-CD, DVD-A, DVD, BLU-RAY, TUNER, TAPE, SAT, DAC, MP3, PC, TV, DAB.
• Own names: Use the Rotary Button on the LINE BLOCK to choose from the list of available characters and
press the Rotary Button to confirm each character.
TEMPERATURE UNITS
1)
: This setting lets you choose desired units for display of the power amplifier
temperature.
1) Appears only when Block Audio Mono Blocks are installed in the system.