Press this button to remove the control panel.
Press this button turn on or off the power.
7. BASIC OPERATIONS
1) PANEL RELEASE BUTTON (REL)
15)POWER ON/OFF BUTTON
7) DISPLAY BUTTON (DISP)
17)MODE BUTTON (MODE)
Press this button to select Radio, CDP or Aux In modes.
The available selections depends on version:
The RESET button is located on the main unit (as shown on the diagram). To press it vertically with a
ballpoint pen or metal object will activate it. The reset button is to be activated for the following reasons:
Initial installation of the unit when all wiring is completed.
All the function buttons do not operate.
Error symbol on the display.
RESET BUTTON
Note:
If press RESET button, the unit still cannot function normally, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the control panel.
8. AUDIO OPERATIONS
6) VOLUME UP/DOWN BUTTON
13)FUNCTION SELECT BUTTON
Press this button to select desired audio function.
While the selected function is displayed, press volume UP/DN buttons to adjust the level within 5
seconds, otherwise the unit will return to volume adjustment mode.
2) MUTE BUTTON (MUTE)
Press this button to mute the sound. Press it again to resume listening.
10)BAND/LOUDNESS BUTTON (BND/LOUD)
Press the Band/Loudness Button long to switch the loudness on or off. When Loudness is on, display
will show 'Loud On' for a few seconds.
ORDER OF FUNCTION:
VOLUME(VOL) -> BASS(BAS) -> TREBLE(TRE) ->BALANCE(BAL) ->FADER(FAD)
Press these buttons alone to adjust sound level, use this button with Function Select Button to
adjust the level of Volume, Bass, Treble, Balance or Fader.
E - 8
Radio CD Player
Radio > CDP > Aux In
RE
SE
T
Sub-woofer On/Off
Press MODE button for more than 3 seconds to activate or turn off the Sub-woofer
(Sub-woofer on/off is an optional feature)
14) VARIABLE COLOR DISPLAY BUTTON (VRD)
This unit is equipped with variable color display: The display color can keep changing
automatically. Press this button briefly, the display will stop at the color it shows. Press this button
shortly again, it will switch to changing color display.
Press this button briefly, the DISPLAY will display the clock for about 2 seconds, then return to
previous display mode.
Clock Adjustment
Under clock display mode, press DISP button until the DISPLAY flashes, press Tuning Up Button
to adjust hour and Tuning Down Button to adjust minute.
