background image

 

 

  RIMS Rocket

™ 

Electric Recirculation Heater 

 

Assembly, Operation & Maintenance 

 
Congratulations on your purchase, and thank you for selecting the RIMS Rocket™ electric recirculation 
heater from Blichmann Engineering™.  We are confident that it will provide you years of service and 
many gallons of outstanding beer.  This manual will familiarize you with the assembly, operation, and 
maintenance of the RIMS Rocket™ electric recirculation heater. 
 

 

IMPORTANT!! 

 

**** PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION **** 

 
 
 

Warning: 

Sections labeled “Warning” can lead to serious injury or death if not followed.  Please read 
these thoroughly and understand them completely before use.  If you do not understand 
them or have any questions, contact your retailer or Blichmann Engineering™ 
(www.BlichmannEngineering.com) before use. Do NOT at ANY time operate the product 
until you thoroughly read and understand these instructions! 
 

Caution: 

Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of 
the equipment.  Please read these sections thoroughly.  If you have any questions, contact 
your retailer or Blichmann Engineering™ (www.BlichmannEngineering.com) before use. 
 

Important: 

Sections labeled “Important” are critical to the proper performance and life of the product. 

 

Содержание RIMS Rocket












Отзывы: