18
is outside of the sensing area.
In these sensing test, the camera would take pictures
once motion captured. When you open the camera, the
screen shows the number of times triggered, you can
review the pictures on the screen.
(Note: The red light
will blink only when the motion is within the sensing
area of the central PIR sensor. The central sensor's
sensing angle of view is 60°. Each of the side sensors
has a 30° angle of view, which is only used to
pre-activate the camera and accelerate the triggering
speed, there is no RED light blinking whatever each of
the side sensors detects motions.)
The results of your testing will help you find the best
placement when mounting and aiming the camera
.
The
height away from the ground for placing the device should
vary with the animal size appropriately. In general, 3 to 6
feet is preferred.
You can avoid potential false triggers due to temperature
and motion disturbances in front of the camera by not
aiming it at a heat source or nearby tree branches or brush
(especially on windy days).
Do NOT install the camera behind the glass window as that
is not possible to sense any motion. Avoid the camera
toward to glass object.
9.3. STARTING
The camera supports two working mode “Motion
Detection” and “Time Lapse”, press
START
button to
enter surveillance mode.
(1) If you set the camera working mode as “Motion
detection” in the menu, the camera countdowns 30 second
