16
Version
Defined Display the version of the camera.
9. MOUNTING AND POSITIONING
9.1. MOUNTING
After you've set up the camera's parameters to your
personal preferences at home, you're ready to take it outside
and the camera is in the
SURVEILLANCE
mode. When
setting up the camera for scouting game or other outdoor
applications, you must be sure to mount it in place correctly
and securely. We recommend mounting the camera on a
sturdy tree with a diameter of about 6in. (15cm). To get the
optimal picture quality, the tree should be about 16-17ft.
(5m) away from the place to be monitored, with the camera
placed at a height of 2.5-3.5ft. (0.75-1m). Also, keep in
mind that you will get the best results at night when the
subject is within the ideal flash range, no farther than 100ft
and no closer than 10ft. (3m) from the camera.
There are two ways to mount the camera: using the
provided adjustable web belt, or the tripod socket.
Using the adjustable strap
: illustrates using the strap on
the camera
.
Push one end of the strap through the two
brackets on the back of the camera
.
Thread the end of the
strap through the buckle. Fasten the strap securely around
the tree trunk by pulling the end of the strap firmly so there
is no slack left (
Figure 8
).
Using the tripod socket
: The camera is equipped with a
socket at the bottom end to enable mounting on a tripod or
other mounting accessories with a standard
UNC 1/4-20
thread screw
(user supplied)
.
