In addition for CDC operation:
“NUMBER”
The CD position in the
magazine (disc number)
is displayed, for example
“CD 8”.
To switch the display mode:
l
Press the DIS button during CD play-
back.
The display mode and the corresponding
setting or value will briefly show on the dis-
play panel, e.g. “TIME”, “2 32”.
If
you
have selected “NAME” without hav-
ing specified a name for the corresponding
disc, “CD PLAY” will appear in the display.
Please read also the chapter “Entering CD
names”.
CDC ooeration
Storing the display mode
You can store your preferred display mode
which will then be active each time the ra-
dio is switched on.
If required,
l
press DIS as many times until the de-
sired setting is displayed.
l
Hold down the
DIS
button until you
hear a beep.
_ _ _
with TPM
l
The TPM function must be switched on
(TPM on/off with the
TPM
button).
The tracks stored with TPM will be played
in ascending order. Any tracks which were
not stored will be skipped over.
Clearing TPM information
Using the
(clear) button, you can clear
single tracks, all of the tracks for one CD or
the entire Track Program Memory.
For CDC operation, you can also clear the
TPM information of either the inserted mag-
azine or all magazines.
In order to clear any of this information, TPM
must be switched on (“TPM” lights up in the
display). If the TPM contains no data, then
“NO TPM” will appear in the display.
CD operation
a)
Clearing a track from the TPM:
l
Switch on
TPM.
l
Select the track with
l
Press the
CLR
button for approxi-
mately two seconds until “CLR
appears in the display.
Now this track has been cleared from
the TPM.
22
SCAN operation
Use this function to scan all of the CD tracks.
For CDC operation, the system will scan the
tracks of all discs.
To
start the Scan function:
l
Press
for approximately one
second.
The tracks will be scanned one after the oth-
er in ascending order.
To
stop the Scan function:
l
Press
once again briefly.
The track currently being scanned is con-
tinued to be played.
SCAN will also be terminated by
l
pressing one of the buttons
AUD,
GEO, DSC, SRC, TPM,
or
b) Clearing a CD from the TPM:
b) Clearing a CD from the
l
Switch on
TPM.
l
Switch on
TPM.
l
Press the
CLR
button for approxi-
mately four seconds until “CLR
DISC” appears in the display.
Now this disc has been cleared from
the TPM.
l
Press the
CLR
button for approxi-
mately eight seconds until “CLR
CD” appears in the display.
Now this disc has been cleared from
the TPM.
c) Clearing all CDs from the TPM:
l
Switch on
TPM.
l
Press the
CLR
button for approxi-
mately eight seconds until “CLR
TPM” appears in the display.
Now all of the discs have been cleared
from the TPM.
CDC ooeration
a) Clearing a track from the TPM:
l
Switch on
TPM.
l
Select the track with
l
Press the CLR button for approxi-
mately two seconds until “CLR TR”
appears in the display.
Now this track has been cleared from
the TPM.
TPM
Track Program Memory
Use this feature to program and play your
favourite CD tracks.
Up to 30 CDs can be managed in the CD
mode, up to 99 discs in the CDC mode.
Storing tracks with TPM
Make sure that the TPM function is switched
off (“TPM” not shown on the display panel).
If you have not yet stored a track in the TPM,
the function will be unavailable.
If required,
switch TPM on/off by pressing the
TPM button.
l
Use
to select a track. The track
number will be displayed.
l
Hold down the TPM button until you
hear a beep.
Now the track has been stored.
With CDC operation, a
symbol will ap-
pear in front of the CD name.
Then select the next track with
and store
with TPM, as detailed above.
You can also store a track at any time dur-
ing CD playback. For this it is necessary that
“TPM” and “SCAN” are deactivated.
Program TPM information for other CDs in
the same way.
Clearing a magazine from the TPM:
l
Switch on TPM.
l
Press the CLR button for approxi-
mately 16 seconds until “CLR
MAG” appears in the display.
Now this magazine has been cleared
from the TPM.
d) Clearing all magazines from the
TPM:
l
Switch on
TPM.
l
Press the
CLR
button for approxi-
mately 24 seconds until “CLR TPM”
appears in the display.
Now all magazines have been cleared
from the TPM.