25
25
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
DANSK
Storing station presets
Once you have found a station that you
want to store,
➮
press the PRESET
3
button.
The frequency band display disappears
from view. The memory location is briefly
displayed in the top right-hand corner.
If you want to set further stations, re-
peat the steps described in “Tuning into
a station” and “Storing station presets”.
Selecting a memory location
Once you have stored some stations,
➮
you can use the CH
5
and CH
6
buttons to select memory lo-
cations.
➮
You can also select the memory
locations directly using the number
buttons
O
on the remote control.
Connecting external
sources
You can connect up to two external vid-
eo and audio sources to the TEV-501
(e.g. a games console or DVD player),
and use the monitor and loudspeakers
for the output. The TEV-501 has two
separate inputs for video signals and
stereo audio signals. The inputs are lo-
cated on the front and back of the TEV-
501. If all the inputs are in use, the TEV-
501 gives priority to the inputs at the
front of the unit.
Connecting a games console / DVD
player to the TEV-501
➮
Use a suitable cable to connect a
games console / DVD player to the
VIDEO IN
8
(
F
), AUDIO IN L
9
(
G
) and AUDIO IN R
:
(
H
) in-
puts at the front or back of the
TEV-501.
To avoid damage to the TEV-501
and the games console/DVD player,
make absolutely certain that the ca-
ble colours match the jack colours
on the units.
➮
First switch on the games console.
➮
Now switch on the TEV-501.
To enable output of an external source,
➮
press the STOP/EJECT
A
button.
EXTERNAL SOURCES
TELEVISION MODE