17
EN
GLISH
Switching to radio mode
If you are in CD, MP3, CD changer or AUX
mode,
press the
BAND
button
?
.
or
press the
SOURCE
button
4
repeat-
edly until "TUNER" appears on the dis-
play.
Selecting the waveband ( Band)/
memory bank
This device can be used to receive stations
in the FM and AM frequency bands. 3 mem-
ory banks (FM1, FM2 and FMT) are avail-
able for the FM waveband and 2 memory
banks (AM and AMT) for the AM waveband.
Six stations can be stored in each memory
bank.
To switch between the wavebands FM and
AM,
press the
BAND
button
?
.
The "Tuner" menu is displayed.
Press the softkey "Band"
7
in FM
mode or
6
in AM mode.
The "Band" menu for the selection of the
waveband is displayed.
Press the softkey "FM"
6
or "AM"
7
.
The radio changes to the selected wave-
band.
To switch between the memory banks FM1,
FM2 and FMT in the FM waveband or be-
tween AM and AMT in the AM waveband,
press the
NEXT
button
2
.
쏅
쏅
쏅
쏅
쏅
쏅
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Press the or button
@
.
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
briefl y press the or button
>
.
To change the set frequency quickly,
press and hold down the or button
>
for a longer period of time.
Adjusting the sensitivity of the
station seek tuning (Sensitivity)
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception. The sensitivity
can be adjusted from 1 (low) to 6 (high).
Press the
BAND
button
?
.
The display shows the fi rst page of the
"Tuner" menu.
Change to the second page of the
"Tuner" menu by pressing the
NEXT
button
2
.
Press the softkey "Sensitivity"
8
re-
peatedly until the desired sensitivity
level is displayed behind "Sensitivity".
쏅
쏅
쏅
쏅
쏅
쏅
Radio mode
SEATTLE MP57-US.indb 17
SEATTLE MP57-US.indb 17
3/29/07 3:24:38 PM
3/29/07 3:24:38 PM