Blaupunkt San Diego DJ A Скачать руководство пользователя страница 16

34

Care notes

To avoid possible problems, we recommend
you to use C-60/C-90 type cassette tapes
only. Store your tapes in a cool place away
from dirt, dust and temperatures exceeding
50 

°

Celsius. Allow very cold tapes to warm

up before playing them in order to avoid
uneven tape transport. After approximately
100 hours of use, dust particles collected
on the playback head or roller may lead to
tape run problems and sound distortions.
Use a head cleaning tape to remove nor-
mal dirt build-up. For tougher cases, use a
cotton swab (Q-Tip) dipped in alcohol. Do
not attempt to clean by inserting a hard ob-
ject into the player!

Reversing the tape

To switch to the other side of the tape dur-
ing playback,

press FR and FF simultaneously.

At the end of the tape the unit will automat-
ically reverse to the other side (autoreverse).
The display shows “TR 1” for track (side) 1
or “TR 2” for track 2.

Notice:
If there is too much tension on the tape dur-
ing playback, the set may reverse the direc-
tion by itself before having reached the end
of the tape side. In this case check the con-
dition of the cassette tape. Sometimes it
helps to rewind it completely.

Listening to the radio during fast
tape winding with RM 
(Radio
Monitor)

During fast winding of the tape, i.e. when
the radio is normally muted, you can use
the RM function to listen to the radio.
For more information please refer to chap-
ter “DSC programming – RM ON/OFF”.

 San Diego DJ-A gb®

03.06.2002, 11:52 Uhr

34

Содержание San Diego DJ A























Отзывы: