Blaupunkt RATK 750104, Руководство пользователя

Страница: 18 / 20

Line will not advance
when you restart the
machine
1. Line is welded to itself.
2. Not enough line on spool.
3. Line is worn too short.
4. Line is tangled on spool.
Grass wrapped or built up around head
Cutting tall grass at ground level.
1. Unit failed
2. Plug is damaged.
1. Lubricate with a silicone spray.
2. Install more line (Refer to “Replacing the Cutting
Line” earlier in this manual).
3. Pull lines while alternately pressing down on
and releasing bump button on side of spool
casing.
4. Remove line from spool and rewind (Refer to
“Replacing the Cutting Line” earlier in this
manual).
Clean affected parts of the machine
Cut tall grass from the top down.
1. Contact dealer to check damage
2. Check the plug
Cutting head is hard to
turn
Grass wraps around
the attachment shaft
and the trimmer head
assembly
Liner trimmer stops and
will not start again
PROBLEM POSSIBLE CAUSE SOLUTION
TROUBLESHOOTING
Waste electrical products should not be disposed of together with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
Separate collection of used products and packaging allow materials to be recycled and used again. Reuse of recycled
materials helps prevent environmental pollution and reduces the demand for raw material.
TECHNICAL SPECIFICATION
Voltage 230V AC, 50Hz
Rated power 550W
No load speed 11000 rpm
Cutting line dia. 1.5mm diameter
Cutting diameter 270mm
Line length 2 x 4.2m
Net Weight 2.5Kg
Vibration value: 2.1 m/s2 K= 1.5m/s2