20
4.
After eighth character (the farthest right character) is completed, first (left-most) character of
next group of eight characters begins to flash. After fifth group of eight characters, pressing >>
will access first group again.
5.
Press Mute to store turn-on message and return to Menu.
Clock Adjustment (“CLOCKSET”)
Pressing << or >> shows blinking time. Subsequent press of << advances the hour; >> advances
the minutes. (To change minute indicator to nearest hour (:00), press Mute button). Unit begins
keeping the time when /\ or V is pressed or when Menu mode ends.)
Tuner Timer Set Mode (“TMR SET”)
1.
Before entering Menu, tune in the radio frequency to be activated by timer.
2.
Enter Menu mode and scroll to “TMR SET” by pressing /\ or V.
3.
Press << or >> to enter timer adjustment mode.
4.
Select time that unit should switch to this station by pressing << to adjust hours, >> to adjust
minutes. Press Mute to adjust minutes to :00.
5.
To store station and time, press /\ / V or DIS.
Tuner Timer On/Off (“TMR ON”/“TMR OFF”)
Tuner timer allows unit to go to a certain frequency at a certain time — from any source. When
ignition on and unit off, the timer even turns the unit on and goes to the specified frequency. Press
<< or >> to turn Tuner Timer on or off.
Scan Times
You can set different scan times for CD/CD Changer (“CD SCNTM”) & Radio (“RD SCNTM”)
between 1 and 16 seconds. Press << or >> to adjust scan time.
Confirmation Beep On/Off (“BTTNBEEP”)
To activate or defeat beep for all button presses, press << or >>. (Button presses requiring more
than 1/2 second always have confirmation beep.)
Adjustable Mute Level (“MUTE LVL”)
The unit’s mute level can be adjusted to any volume level. This mute level also applies to cellular
mute. During Menu mode, once “MUTE LVL” appears, actual mute level is heard. Adjust the mute
level volume by using <</>>, NOT + and –. (If mute is activated when unit volume level is lower
than mute level, unit volume level is maintained, even though “MUTE” appears.
Maximum Turn-On Volume Level (“MAXONVOL”)
Sets maximum volume that is heard when unit is turned on. (Once “MAXONVOL” appears, actual
MAXONVOL level is heard.) Adjust the MAXONVOL volume by using <</>>, NOT + and –. If unit is
turned off while volume is louder than MAXONVOL, turn-on volume will be at MAXONVOL level.
However, if unit is turned off when volume level is lower than MAXONVOL, turn-on volume will be at
level it was when unit was turned off.
Loudness Levels
You can choose between two loudness settings for each audio source: “LOUD AUX”, “LOUD CD”,
(For CD Player and/or CD Changer) “LOUD AM”, “LOUD FM”. “LOUD 1” provides up to 8 dB boost
in bass (centered at 60 Hz) and up to a 2 dB boost in treble (centered at 8 KHz). “LOUD 2” provides
LIST
TPM
Содержание Los Angeles CDM147
Страница 1: ......