Blaupunkt Los Angeles CDM147, Запись владельца, Страница: 16 / 24

16
CD Playback
When a CD is already in unit, press SRC as needed to activate “CD PLAY”.
CD Eject
Press eject. Disc ejects. If disc is not removed within about 5 seconds (unless ignition off) or if eject
is pressed again within this time, disc is automatically reloaded, although unit stays with current
audio source. Press the SRC as required to access “CD PLAY” and restart disc playback.
Insert/Eject Summary
Activity Ignition Off Ignition On/ Ignition On/Power On/
Unit Off Other Source
Insert No Reaction Turns Unit On, CD Player
becomes active becomes active
source. source.
Eject Disc ejects. Stays Disc ejects. After Disc ejects. After
out unless other 5 seconds, disc 5 seconds, disc
button pressed. re-inserts. re-inserts.
Track Up/Down
Press << and >> to select track. Track Number and elapsed play time appear. Pressing << will
restart current track if more than 1 second of track has been played. If less than 1 second, unit
goes to beginning of previous track.
CD Track Cue and Review
Press and hold >> and << for audible cue/review.
CD Track Repeat Play
Press RPT to play current track repeatedly. (This cancels MIX or SCAN if previously active.) RPT1
appears. If track manually advanced, RPT becomes active for new track. To cancel, press again.
Mix Play
Press MIX to play tracks in random order. (This cancels RPT or SCAN, if previously active.) A track
will not be played a second time until all tracks have been played. To cancel, press again.
CD Track Scan
Press SCA to start Track Scan. SCA deactivates any active MIX or RPT modes. “TRCKSCAN”
appears for 2 seconds. Track No. and Elapsed Play Time blink during scanning operation. Unit
stops at each track for time set under Menu. Unit continuously scans until user stops scan by
pressing a SCA, source control, or MENU.
Pause
To pause, press II>. To cancel, press again or press other playback-related button.
CD Player Reset
In unlikely case of CD player trouble, reset CD player by turning unit’s power and/or ignition off,
and then power on unit. (See TROUBLESHOOTING on page 23.)
LIST
TPM