Blaupunkt London RDM 104, Руководство по эксплуатации, Страница: 10 / 26

33
London RDM 104
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
SK
A
F
RANÇAI
S
Adjusting bass and treble
In order to activate the bass and treble set-
tings
•
press the AUD button once.
Either BAS or TRE and a number between -
6 and +6 will appear in the display.
In order to adjust the bass (BAS)
•
press the rocker switch <</>>.
<< The bass will decrease.
>> The bass will increase.
In order to adjust the treble (TRE)
•
press the rocker switch / .
The treble will increase.
The treble will decrease.
The number in the display will change accor-
dingly between -6 and +6. It will automatically
stop at 0.
Finish making the new setting by pressing
the AUD button; otherwise the display will
return to radio or CD mode approximately 8
seconds after the last adjustment has been
made.
You can store different values for this setting
separately on KeyCard 1 and 2.
Setting the clock
This radio is also equipped with a clock which
you can have displayed during radio or CD
playback. In addition to this, the clock is also
used for the TIM standby recording feature.
To select the clock mode
•
press the DSC button.
The clock display will then appear.
In order to set the hours
•
press the rocker switch << and then
set the hours with the rocker switch
/ .
In order to set the minutes
•
press the rocker switch >> and then
set the minutes with the rocker switch
/ .
To store the new setting
•
press the -dB button or
• press the DSC button.
Press the DSC button at any time in order to
switch to the clock display during radio or CD
playback.
Adjusting the loudness
It is more difficult for the human ear to detect
bass sounds at low volume than to hear mid-
range and high sounds.
The loudness switch balances this out by
amplifying the soft bass sounds.
In order to switch loudness on and off
•
press the AUD button for longer than 2
seconds.
When loudness has been switched on, then
LD will appear in the display.
The point at which loudness takes effect can
be set in the DSC mode.
•
Press the DSC button.
• Then press the rocker switch re-
peatedly until LOUDNESS appears in
the display.
To alter the setting
•
press the rocker switch <</>>.
LOUD will appear in the display with a num-
ber between 1 and 6.
In order to store the new setting
•
press the DSC button.
You can store different values for this setting
separately on KeyCard 1 and 2.