29
Kopenhagen RCR 45
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Warning beep
If you leave the reception area of the traffic
program station you are currently listening to,
you will hear a warning beep after approxi-
mately 30 seconds.
This warning beep will also be released when
pressing a preset without a traffic program.
Switching the warning beep off
a) Tune to another traffic program station:
•
Press the rocker switch, or
•
press a preset button with a station
offering traffic information.
Alternative:
b) Switch off the priority for traffic an-
nouncements:
•
Press TIM > 2 sec.
In the display, the “TA” indication
goes out.
Automatic seek tuning start
Prerequisite:
The priority for traffic announcements is ac-
tivated. If you leave the reception area of your
traffic program while listening to a tape or
when having turned down the volume com-
pletely, the car radio will automatically tune
into another traffic program station.
Switching from stereo to mono
(FM)
If reception is poor, you may get better sound
quality by switching to mono:
•
Press the lo button for approximately
2 seconds.
With mono playback, the stereo sign
will disappear from the display.
Each time the radio is switched on, stereo
playback is activated.
The unit will automatically switch to mono if
the received signal is not strong enough for
stereo playback.
Reception of traffic announcements with RDS-EON
(Enhanced Other Networks)
Many FM broadcasters provide their service
area with traffic messages at regular inter-
vals.
All traffic program stations transmit a special
telegram signal alongside their programs,
which is recognised and decoded by the car
radio.
As soon as such a signal is received, the
display shows “TP” (Traffic Program).
Other radio stations do not actually air traffic
announcements themselves, but by using
RDS-EON they make it possible to receive
the traffic announcements of another station
within the same radio network. In this case,
“TP” will light up in the display as soon as the
priority for traffic announcements is activa-
ted. The display must then show “TA”.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
traffic program for the duration of the messa-
ge and return to the original program after the
end of the message.
Traffic announcement priority
on/off
If the priority for traffic announcements is
activated, “TA” will appear in the display. To
switch the function on/off:
•
Press the TIM button > 2 sec.