ENGLISH
E-6
Storing the station names
You can assign a name to each radio station and store it in
memory. As much as 30 station names can be stored com-
posed with 8 characters each.
Storing the station names
1.
Tune in a station whose name you want to store.
2.
Press the
DISP
for more than 2 seconds.
The “ NAME EDT ” will light then the “ _ _ _ _ _ _ _ _ ” on
the display window. The first “ _ ” flashes.
3.
Enter the characters.
A. Rotate the dial in a clockwise direction to select the
desired characters.
( A
➜
B
➜
C
➜
. . . Z
➜
<
➜
>
➜
∗
➜
+
➜
′
➜
−
➜
′
➜
/
➜
0
➜
1
➜
2
➜
3...9
➜
“ ”Space )
B. Press the
TUN/ TRK
to move the flashing cursor to
the next position. If you press
TUN/ TRK
, the flash-
ing cursor moves to the left.
C. Repeat steps A. and B. to complete entering the en-
tire name 8 characters max.
Tip
To erase/correct a name, press the
DISP
for more than
2 seconds to clear the character and re-enter.
4.
Press the
MUTE / SENS
to store the station name.
The station name flashes.
5.
To return to the normal radio reception, Press
DISP
.
Erasing the station names
1.
Tune in any station and press the
DISP
for more than 2
seconds.
2.
Press the
MUTE / SENS
.
The station name or “ _ _ _ _ _ _ _ _ ” flashing.
3.
Rotate the dial to select the name of the station that you
want to erase. To erase all the name of the stations, dis-
play “
✳
ALL DEL ”.
4.
Press the
DISP
for more than 2 seconds.
Repeat steps 3. and 4. if you want to erase other names.
5.
To return to the normal radio reception, Press
DISP
.
L-ch Level meter
R-ch Level meter
Direct Access to Memorized Stations via
Station call
You can search for the memorized AM & FM station names in
the memory.
1.
Press the
DISP
to display the “ STN CALL ” on the dis-
play window.
2.
Rotate the large dial to select the desired station name.
3.
Press the
MUTE / SENS
to tune in the desired station.
Level Meter selection
The meter displays can be selected from four types.
You can select :
•
METER 1 : Type that the level meter goes upward.
•
METER 2 : Type that only the very top segment lights.
•
METER 3 : Type that the remaining segments light. (op-
posite of METER 2)
•
METER 4 : Type that the level meter goes up and down
dividing from the center segment.
•
METER 0 : No meter is indicated.
1.
Press the
DISP
to display the “ METER 1 ” on the display
window.
2.
Rotate the dial in a clockwise directiopn to select the
desired meter indication.
METER 1
➜
METER 2
➜
METER 3
➜
METER 4
➜
ME-
TER 0
Level Meter Sensitivity selection
The sensitivity of the level meter display can be switched.
You can select :
•
LEVEL 1 : Normal sensitivity.
•
LEVEL 2 : High sensitivity.
1.
Press the
DISP
to display the “ LEVEL 1 ” on the display
window.
2.
Rotate the dial to select the desired meter sensitivity.
Enhancing the bass sound
For extended bass centered @ 72Hz, the XBASS function
can be set for either each band and CD mode.
You can select :
•
XBASS 1 : Enhanced BASS level (low).
•
XBASS 2 : Enhanced BASS level (Middle).
•
XBASS 3 : Enhanced BASS level (High).
•
XBASS 4 : Enhanced BASS level (Very high).
•
XBASS 0 : No BASS enhanced.
Press the
XBASS
repeatedly to select the bass sound.
“
” appears on the display window.
Each time you press
XBASS
, the current mode appears on
the display window and the mode change as follows:
XBASS 0
➜
XBASS 1
➜
XBASS 2
➜
XBASS 3
➜
XBASS 4
LEVEL 1
LEVEL 2