background image

SYMBOLS

The symbols below are used on the type plate on the machine. They 

indicate information on the product, or instructions on how it should be 

used.

3

4

SYMBOLS

SYMBOL

 

BETYDER

 

 

 

 

WARNING: 

Indicates danger, warning or important information.

 

 

 

 

WARNING: 

Read all the instructions before use, to minimise the risk of

 

 

personal injury.

 

 

 

 

Wear ear protection, safety glasses and a breathing mask.

 

 

 

 

Do not expose the machine to rain.

 

 

 

 

Keep onlookers, especially children and pets, at least 10 metres from the work

 

 

area.

 

 

 

 

Unplug the power cord before maintenance/cleaning, or

 

 

if the power cord is damaged.

 

 

 

 

SYMBOL

 

BETYDER

 

 

 

 

WARNING: 

The blades are sharp.

 

 

 

 

WARNING: 

Avoid running over objects. Objects can be thrown out and cause

 

 

serious injury and/or material damage.

 

 

 

 

STOP! 

The blades continue to rotate after the motor has been switched off. Wait

 

 

until all moving parts have completely stopped before making any adjustments.

 

 

 

 

WARNING: 

Unplug from the power cord immediately if it, or an extension cord,

 

 

gets damaged.

 

 

 

 

The product is double insulated.

 

 

 

 

WARNING: 

Keep the power cord away from the blades.

 

 

 

 

ELECTRICAL HAZARD! 

Risk of injury and/or property damage.

 

 

 

 

Complies with all relevant EU directives.

 

 

 

 

Products that have reached the end of their useful life must be recycled in

 

 

accordance with local regulations.

 

 

 

 

Содержание GX1000









Отзывы: