Blaupunkt Denver CD147 Скачать руководство пользователя страница 18

18

Maximum Turn-On Volume Level (“MAXONVOL”)
Sets maximum volume that is heard when unit is turned on. (Once “MAXONVOL” appears, actual
MAXONVOL level is heard.) Adjust the MAXONVOL volume by using <</>>, NOT + and –. If unit is
turned off while volume is louder than MAXONVOL, turn-on volume will be at MAXONVOL level.
However, if unit is turned off when volume level is lower than MAXONVOL, turn-on volume will be at
level it was when unit was turned off.

Loudness Levels
You can choose between two loudness settings for each audio source: “LOUD AUX”, “LOUD CD”,
“LOUD AM”, “LOUD FM”. “LOUD 1” provides up to 8 dB boost in bass (centered at 60 Hz) and up to a
2 dB boost in treble (centered at 8 KHz). “LOUD 2” provides up to 12 dB boost in bass (centered at
60 Hz) and up to a 4 dB boost in treble (centered at 8 KHz). To set the loudness level for each
source, use << and >>.

Radio Station Naming (“STN NAME”)
Available only while radio is active source. One name per frequency, 8 characters per name. (Names
can be assigned to any frequency, preset or not.) If you try to enter more than 30 names, “**FULL**”
appears. You can then enter new names after erasing some of existing names.

To store station names:

1.

Press DIS for more than 2 seconds to enter Menu mode.

2.

Scroll to Radio Station Naming feature by pressing /\ / V .

3.

Enter Station Name Access mode by pressing << or >> button.

4.

Tune to desired station using BND, presets or /\ / V buttons. If previously named, name
appears.

5.

Press << or >> buttons to enter Station Name Edit mode. Eight “  ” appear with first one
blinking.

6.

Press /\ / V to select character. Select “  “ for a blank space.

7.

Press << or >> buttons to select next character position.

8.

Press Mute to store name. Display blinks STORING twice before return to Station Access
mode.

9.

To name another station, repeat steps 4-8.

10. To return to Menu, press Mute again.

(There is no time-out from Station Name Access & Edit modes.)

Display Priority & Radio Station Names (See Display Options on page 13)

Changing a Radio Station Name
Repeat steps 1 to 10 in Radio Station Naming, changing only those characters that you wish to change.

Erasing ONE Radio Station Name
Access Station Access mode (See Radio Station Naming, above.) Choose station with name to be
deleted. When name appears, press Mute for 2 seconds. Beep sounds. Release now to delete this
name. “NAME” and “DELETED” blink alternately.

Wireless Remote Control

For added convenience you can control key features of your Blaupunkt 5 Series Receiver with either
of two Blaupunkt wireless remote controls, the RC-06H or the Thummer™.

The unique Thummer mounts to the inside of the steering wheel rim and allows you to control the
receiver without taking your hand off the steering wheel. The RC-06H is a credit card-sized remote
control. To receive wireless commands, your receiver is equipped with a built-in infrared sensor (or
“eye”) on the faceplate.

Both of remote controls have the following buttons: SRC, SCA, +/- /\, V, << and >>. You can use
them to activate all of the same features as you would using the corresponding buttons on front of the
unit itself.

See your Blaupunkt dealer for details.

Содержание Denver CD147





















Отзывы: