Table of Contents
Product Overview
Using the Dual Camera
Changing the battery
Adjusting the position of the lens
Basic Operations
Switching between operating modes
Navigating the menu
System setting
How to shoot
Start / Stop shooting
Open / Close audio
Video playback
Reset the DashCam
Product Overview
Using the Dual Camera
Charging the battery:
There are two methods for battery charging.
1. Use the USB cable to connect the DashCam to a computer for charging.
2 . Use the included vehicle adapter power source for charging.
Inserting a memory card
Insert a MicroSD card into the card slot. The MicroSD card will be secured into
the slot when you hear a “click”.
The DashCam supports 4GB to 32GB MicroDS Card.
Formatting a memory card
MicroSD card. Select “Yes” to allow the DashCam to format the memory card
and install the required software needed for viewing DashCam videos on your
computer. The software only works with PC computers.
Note: Before you format the memory card, make sure you have backed up any
To remove, push the MicroSD card inside and the card will pop u p .
Adjusting the pisitions of the lens
You can adjust the front lens of the DashCam by 20° upwards or downwards for
better viewing and recording angle.
Charging LED indicator Power on LED indicator
Left key
Power
button
Right key
Microphone
MicroSD
Card slot
Mode key
Menu key
OK key
LCD
Reset key
TV/Car charger
interface
MicroSD
Card slot
Speaker
Back clip
Camera lens
Dual Camera HD Dashcam
BPDV142
2
3
4
3
When the DashCam is charging, the red indicator light turn on. When
it is finished charging, the indicator light will automatically turn off.
The whole charging process takes approximately 4 hours.
NOTE: In the event that your vehicle loses power, the reserve battery will
save files and record data.
4
4
4
5
5
5
5
5
5
5
6
6
6
8
8
Technical Specifications
Inserting a memory card
