&/
(-*4)
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
Gently close the control panel whilst
exerting a little pressure until you feel
it click into place.
The CD starts playing.
Note:
If the vehicle ignition was switched
off prior to inserting the CD, you must
switch the device on first with the but-
ton
to start the playback.
If a CD is already inserted in the drive,
press the
SOURCE
button
repeat-
edly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press one of the arrow buttons
to
select the next or previous track.
If you press the or button
once, the
player will play the current track again from
the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down the or
button
until fast track selection
backwards / forwards begins.
*
*
*
*
Fast searching (audible)
To fast search backwards or forwards,
press and hold down the or button
until fast searching backwards / for-
wards begins.
Random track play (MIX)
Press the
5 MIX
button
.
"MIX CD" appears briefly on the display and
the MIX symbol is displayed. The next ran-
domly selected track will then be played.
Cancelling MIX
Press the
5 MIX
button
again.
"MIX OFF" appears briefly on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
Press the
MENU
button
for longer
than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
To end the scanning process,
press the
MENU
button
.
The currently scanned track will then con-
tinue to be played normally.
*
*
*
*
*
CD mode