Blaupunkt 5B49M1 Series, Инструкция по эксплуатации

Страница: 18 / 52

en
Basic settings
18
Q
Basic settings
Basic settings
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Changing the basic settings
The oven must be switched off.
1.
Touch the
r
sensor for approx. four seconds.
The first basic setting appears in the display panel,
e.g.
™‚ ƒ
.
2.
Change the setting in the settings area.
3.
Touch the
r
sensor to confirm.
The next basic setting appears in the display panel.
4.
Touch the
r
sensor repeatedly to call up all of the
basic settings. Change the settings in the settings
area.
5.
Finally, touch and hold the
r
sensor again for
approx. four seconds to confirm that you want to use
the settings you have selected.
This applies all the changes to the basic settings.
To exit the basic settings without confirming the
changes, touch the
#
sensor.
The basic settings can be changed at any time.
Basic setting Options
™‚
Length of audible signal dura-
tion upon completion of a
cooking time or timer count-
down
‚
= approx. 10 seconds
ƒ
= approx. 30 seconds*
„
= approx. 2 minutes
™ƒ
Amount of time until a setting
is applied
‚
= approx. 3 seconds*
ƒ
= approx. 6 seconds
„
= approx. 10 seconds
™„
Button tone that sounds when
a button is touched
‹
= off
‚
= on*
™…
Display panel brightness
‚
= dark
ƒ
= medium
„
= bright
™†
Display time of day?
‹
= hide the time
‚
= display the time*
™‡
Enable childproof lock activa-
tion?
‹
= no
‚
= yes*
ƒ
= yes, with locked door**
™ˆ
Interior lighting on when
appliance in operation?
‹
= no
‚
= yes*
™‰
Cooling fan run-on time
‚
= short
ƒ
= medium*
„
= long
…
= extra long
™Š
Telescopic rails retrofitted?**
‹
= no* (for rails and single
pull-out system)
‚
= yes (for double and triple
pull-out systems)
™›
Reset all values to factory set-
tings?
‹
= no*
‚
= yes
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.