BLAUBERG Ventilatoren SHM 100 DK, Руководство пользователя

Страница: 9 / 12

www.blaubergventilatoren.de
SHM 100 DK
9
TECHNICAL MAINTENANCE
The technical maintenance includes periodic cleaning of the grille and solar battery surfaces from accumulated dust and dirt, as well as
washing the built-in filter as it becomes dirty, but at least once every 6 months.
To clean the unit, wipe its surfaces with a cloth or a brush wetted in a mild soap solution, then wipe the surfaces dry.
Avoid penetration of water inside the electric motor and other electric parts.
POSSIBLE REASONS AND TROUBLESHOOTING
Problem Possible reasons Troubleshooting
When switching on the
ventilator, the fan does not
start.
No power supply.
Make sure the power supply line is connected correctly,
otherwise troubleshoot a connection error.
The motor is jammed, the impeller blades are soiled.
Turn the ventilator off. Troubleshoot the motor jam and
impeller clogging. Clean the blades. Turn the ventilator
on.
Low air flow.
The filter or the fan is clogged. Clean or replace the filter, clean the fan.
The solar battery is dirty. Clean the solar battery.
Noise, vibration.
The impeller is clogged. Clean the impeller.
Loose screw connection of the unit casing or the outer
ventilation hood. Tighten the screws of the ventilator or the outer
ventilation hood.
TROUBLESHOOTING
STORAGE AND TRANSPORTATION REGULATIONS
• Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range
from +5 °C to + 40 °C and relative humidity up to 70 %.
• Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion, insulation, and sealing
deformation.
• Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.
• Follow the handling requirements applicable for the particular type of cargo.
• The unit can be carried in the original packaging by any mode of transport provided proper protection against precipitation and
mechanical damage. The unit must be transported only in the working position.
• Avoid sharp blows, scratches, or rough handling during loading and unloading.
• Prior to the initial power-up after transportation at low temperatures, allow the unit to warm up at operating temperature for at least
3-4 hours.