BLAUBERG Ventilatoren Ceileo 200, Руководство пользователя

Страница: 12 / 20

www.blaubergventilatoren.de
Ceileio
12
— turn-off delay timer adjustable from 1 to 90 minutes (default setting 15 minutes).
— turn-on delay timer adjustable from 0 to 180 seconds with the increment of 10 seconds (default setting 0).
— humidity set point adjustable from 50 % up to 90 % (default setting 75 %).
— access to submenu of the fan operation mode.
Operation mode — the fan operates without any activation signal from the switch, humidity or motion sensor.
Operation mode — the fan operates with activation signal from the switch, humidity or motion sensor.
— back to the upper setup menu level.
Once the switch is turned on or the humidity or motion sensor is activated, the fan switches from the mode to the mode . After a
signal is no more received from the sensor in case of the indoor humidity normalization, or no more motion is detected in case of the fan
shutdown, the fan keeps running for a set turn-off delay time and then switches from the mode
to the mode .
SETUP OF THE OPERATION MODES AND
The and modes can take the following values for the fan with an AC motor:
— the fan is turned off.
— the fan operates at reduced performance.
— the fan operates at maximum performance.
EXAMPLE 1
= , = — with these activated settings the fan is constantly turned off. Once the switch is turned on or a sensor is
activated, the fan starts to run at reduced performance.
EXAMPLE 2
= , = — with these activated settings the fan runs at reduced performance. Once the switch is turned on or a
sensor is activated, the fan starts to run with the maximum capacity. This setting is factory set and is the default setting.
MAINTENANCE
The fan maintenance includes regular cleaning of the surfaces of dust and dirt. Replace the filter as required, but at least every 6 months.
The impeller cleaning is shown below. Clean the impeller blades thoroughly every 6 months.
DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE
ANY MAINTENANCE OPERATIONS!