15
Symptom
Solution
Knee does not stabilise
Increase sensitivity of ESK+
Shift socket anteriorly
Replace stabilizing mechanism if trailing edge of
brake is damaged
Check Stanceflex rubber and replace if necessary
(See minimum thickness in compression in
Knee
Flexion Following Heel Strike
section)
Knee does not release
Decrease sensitivity of ESK+
Check correct adjustment of piston rod length
Shift socket posteriorly
Heel rise too high during swing
See control cylinder IFU
Heel rise too low during swing
See control cylinder IFU
User experiences terminal impact
See control cylinder IFU
Device does not fully extend during swing See control cylinder IFU
If after following these instructions you still have problems with the function please contact the
sales team in your area for advice.
10.3
Further Adjustments
The instructions in this section are for practitioner use only.
938250PK2/1-0421