938348/5-0719
EN
Beware of slip hazard at all times especially
on wet/smooth surfaces.
Excessive wear of the sole cover could lead
to loss of grip.
Excessive wear or damage to the spring
elements could lead to structural failure.
The limb should not be used if the sole
cover is excessively worn, torn or loose.
Visually inspect the Blade XT especially the
condition of the sole and toe spring before
any activity.
Any changes in performance of this device
must be reported to the practitioner.
Changes in performance may include:
• Reduced energy return
• Unusual noises
• Softening of the toe and/or heel
Any changes in body weight and/or activity
level of the user must be reported to the
Clinical Practitioner.
Assembly and repair of the BladeXT must
only be carried out by suitably qualified
Practitioners.
The product is water proof to a maximum
depth of 1 metre.
Thoroughly rinse with fresh water after use
in abrasive environments such as those that
may contain sand or grit, for example, to
prevent wear or damage to moving parts.
Thoroughly rinse with fresh water after use
in salt or chlorinated water.
Exclusively for use between -15˚C and
50˚C.
Cleaning:
Use a damp cloth and mild soap to clean
outside surfaces, DO NOT use aggressive
cleansers. Thoroughly dry before use.
The BladeXT is designed specifically for
general sport and running.
Key points and precautions for use
Please keep these instructions.
Steps and stairs
Because of the deep ‘C’ shape side profile
of the Blade XT care should be taken when
descending stairs and steps due to the
potential hazard of ‘over-stepping’.
Be aware of finger trap hazard at
all times
Toe Spring
Sole Cover
BladeXT and Blatchford are registered trademarks of Blatchford Products Limited.
Manufacturer’s Registered Address
Blatchford Products Limited, Lister Road,
Basingstoke RG22 4AH, UK.
