Operating Instructions
BG-250-230/60
Operation October
2005
Diamond-Grinding discs
Following diamond-grinding discs are available for the Blastrac grinding machine
BG250.
Tool Application
Part
No.
10 Segment
Concrete levelling/ heavy removal
CG-1010DB
20 Segment
General surface grinding
CG-1020DB
20 Segment Turbo
Concrete smoothing
CG-1020DBT
These diamond grinding discs are specially designed to be use on the concrete
surfaces. For questions about your application, please contact your local Blastrac
representative. Some blades are available in a variety of segment hardnesses.
Segment hardness may be matched to specific jobs resulting in successful
applications and improved diamond life.
6.2 Switching off the machine
2
1
3
4
5
13
The grinding machine must be
lifted by pushing down on the
handgrip (2) and pulling back
on the operating lever (1).
Pulling back on the operating
lever (1) will lower the support
and take the weight off the
grinding disc. Push E-stop (3).
Figure 6.2
Always store the machine on the kick stand when the machine is not
being used. If you rest the machine on the grinding disc, the flexible
coupling could permanently deform. A deformed flexible coupling
may gouge the concrete and will result in uneven diamond wear and
excessive vibration. See Chapter 3 for parts identification.
© Copyright Blastrac
Revision (A) 10-20-05
36