Blastrac 1-9 DEZ, Руководство пользователя, Страница: 2 / 51

FORWARD
Blastrac is pleased that you have selected this Blast Cleaning System for your
surface preparation requirements. This environmentally safe, closed-cycle,
surface preparation machine has been designed and built for abrasive blast
cleaning of horizontal surfaces.
This manual has been prepared to assist the operator and the maintenance
personnel in understanding the machine so that it may be operated in the most
efficient manner and maintained in the best condition. Therefore, it is necessary
that all personnel responsible for the operation and maintenance of the machine
read the manual thoroughly. By following the instructions in this manual, this
system can be easily and effectively operated, serviced and maintained by
personnel assisted by a brief period of familiarization and training from a Blastrac
technician.
Before attempting to operate, service, or maintain the machine, the personnel
should thoroughly familiarize themselves with the physical makeup of the
machine, be familiar with the major systems of the machine, and have an
understanding of its operation.
The operating and maintenance personnel must obey all the warnings and safety
precautions posted on the side of the machine and stated throughout this
manual. Serious injury to personnel or severe damage to the equipment may
result if the warnings and precautions are not followed, or through careless
handling of this equipment.
Initial operation and maintenance must be done cautiously. Extreme care should
be taken when activating any control devices until the response of the machine
and its various components are clearly understood.
If you have any questions or problems in regard to the operation or capabilities of
this Blastrac machine, please contact:
Blastrac
6215 Aluma Valley Drive
Oklahoma City, OK 73121
405/478-3440
800/256-3440
or your nearest Service Center.